Rockville RPM1470 14 Channel 6000w Powered Mixer w/USB, Effects/14 XDR2 Mic Pres,Black

Description

• Rockville RPM1470 14-Channel 6000 Watt Powered Mixer, 7 Band EQ, 24-Bit Effects, USB, Bluetooth, and 48V Phantom Power. RMS Power Output: 750 Watts x 2 @ 4 Ohm. 500 Watts x 2 @ 8 Ohm. Program Power Output: 1500 Watts x 2 @ 4 Ohm. 1000 Watts x 2 @ 8 Ohm. Peak Power Output: 3000 Watts x 2 @ 4 Ohm. 2000 Watts x 2 @ 8 Ohm.
• 14 Channel mixer section: 12 mono channels, 1 stereo channel. 14 high-quality XDR2 mica preamps with switchable +48 V phantom power for condenser microphones. XDR2 mica preamps are low-noise and low distortion. These are some of the best sounding mica pore’s on the market. Built in USB allows you to play songs from your computer or a thumb drive. Built in recording – allows you to record your main mix onto the USB or SD card . USB supported formats are MP3, WAV, WMA.
• Built in advanced Bluetooth wireless audio streaming with the most reliable Bluetooth chip on the market. 24 BIT digital effects processor with 16 preset digital effects including (reverb, chorus,, delay, chorus, phase, flinger and various multi-effects). Effects level control can adjust signal level of each effect. Effects mute button. FX footswitch input lets you turn your effects on or off . 4-Band EQ (high, high-mid, low-mid, low) per channel.
• Each channel has gain, aux control, FX control, Pan control, Volume control. Peak LED indicator has a red LED that indicates a signal level that is 5dB below clipping . Dual Stereo 7-band Graphic EQ allows for precise frequency correction of monitor and main outputs (with EQ kill switch). Aux send and Aux returns on every channel to connect all types of external effects and processors. You can control your monitor mix and check levels through your headphones . Limit L and Limit R LED indicators.
• These limiters are designed to go brighter as clipping gets stronger and will remain lit up until the channels stop clipping. We recommend lowering the gain if you see these LED’s lit up. Power and Output level LED indicators. Main output fader allows you to fade the sound between the left and right channel. RCA input, RCA output, and USB player. Headphone jack for monitoring the master signal and individually monitoring each channel with PFL, L/R.